Sapphire Seal-O-coat

entry image

Sapphire Seal-O-Coat

Our product is a sealer system that works both as a sealer and as an undercoat with excellent hiding property and which fight against dampness, efflorescence, and alkalinity, at the same time acts as a superior undercoat for direct top coat application, by using this primer there is a huge improvement for top coat coverage. If top coat emulsion is applied directly over SEAL-O- COAT, minimum 20% more coverage will be achieved.

  • Surface preparation : For Fresh /New Surfaces: strip all loose particles from the surface through wire brushing and scraping surfaces or sand papering and wipe down, wash the surface with water and allow to dry.

  • For previously painted surface
  • Strip all the old paint and loose particles from the surface before starting the above process. Apply one coat of Seal-o-Coat penetrating acrylic primer and allow it to dry for 6-8 hours. After applying Wall putty allow it to dry for 4-6 hours. Sand the surface with emery paper and wipe clean. Apply one coat of Interior primer or Seal-o-Coat and allow it to dry for 6-8 hours.
  • Dilution Ratio:
  • Thin one litre premium emulsion with 400ml-500ml of water .Apply 2-3 coats of the paint with an interval of 3-4 hours between successive coats
  • Shake well before use and do not over dilute. Strain the material through a fine sieve before use. Apply by roller or brush