Sapphire7 Ultra Weather Care

Pigments: Titanium Dioxide, High Performance Additives, High Quality Mineral ExtendersBinder:Pure acyrlicDilution:20-30% by volume with clean potable water.

Texture: Rich Matt Finish Touch dry:30 Minutes, Hard dry:8 hrs. Washability: 2 Weeks, Recoating Time:2-3 hrs. Coverage:80-100 sqft / ltr. in 2 coats. (Coverage depends on the substrate condition) Pack Size:1 ltr, 4 ltr, 10 ltr & 20 ltr

Sapphire7 ultra care is a water-based, 100% Acrylic smooth emulsion with silicon additives that offers an anti-algal and high performance exterior wall finish.

• DIRECTION FOR USE:
Surface preparation : For Fresh /New Surfaces: strip all loose particles from the surface through wire brushing and scraping surfaces or sand papering and wipe down, wash the surface with water and allow to dry.


• For previously painted surface
Strip all the old paint and loose particles from the surface before starting the above process. Apply one coat of Seal-o-Coat penetrating acrylic primer and allow it to dry for 6-8 hours. After applying Wall putty allow it to dry for 4-6 hours. Sand the surface with emery paper and wipe clean. Apply one coat of Interior primer or Seal-o-Coat and allow it to dry for 6-8 hours.

• Dilution Ratio:
• Thin one litre premium emulsion with 400ml-500ml of water .Apply 2-3 coats of the paint with an interval of 3-4 hours between successive coats
• Shake well before use and do not over dilute. Strain the material through a fine sieve before use. Apply by roller or brush