Sapphire Premium Exterior Emulsion

entry image

Sapphire Premium Exterior Emulsion

Sapphire7 Premium Exterior is a one stop solution for exterior painting. The range offers high performance emulsion and weatherproofing. It is a Weather Resistant Emulsion with a smooth finish made with a modified acrylic, exterior wall finish with silicon additives.

DIRECTION FOR USE:

For Fresh / New Surfaces: strip all loose particles from the surface through wire brushing and scraping surfaces or sand papering and wipe down, wash the surface with water and allow to dry.

For previously painted surface : Strip all the old paint and loose particles from the surface before starting the above process.

Apply one coat of Seal-o-Coat penetrating acrylic primer and allow it to dry for 6-8 hours .After applying Wall putty allow it to dry for 4-6 hours. Sand the surface with emery paper and wipe clean. Apply one coat of Interior primer or Seal-o-Coat and allow it to dry for 6-8 hours.

Dilution Ratio

Thin one litre premium emulsion with 400ml-500ml of water .Apply 2-3 coats of the paint with an interval of 3-4 hours between successive coats

Shake well before use and do not over dilute. Strain the material through a fine sieve before use. Apply by roller or brush